<input id="k0i0a"><tt id="k0i0a"></tt></input>
<menu id="k0i0a"><tt id="k0i0a"></tt></menu>
  • 簡體中文

    HOTLINE : +86-519-88679228

    • Round Static Vacuum Dryer
    • Round Static Vacuum Dryer

    YZG Round Static Vacuum Dryer

    Key words:Round Static Vacuum Dryer,Static Vacuum Dryer,Vacuum Dryer
    Brief Introduction:Tt is well known that vacuum drying is to put raw material under the state of vacuum fo r heating and drying If use vacuum to pump air and humidity out,the dry speed will be faster.
    Purchase Online
    Product Detail Product Image Customers 動畫演示

    FEATURES
    1) The boiling point of raw material will be decreased under the vacuum condition and make the evaporator increases the pushing force of heat transfer.
    2) The heat source can be low pressure steam or waste heat;
    3) The loss of the heat during the evaporation is only a little.
    4) The disinfection treatment can be carried out before drying and there is no impurity material mixing during drying process. It is in conformity with the requirement of GMP;
    5) Static vacuum dryer will not damage the shape of raw materials.
     

    WORKING PRINCIPLE
    Vacuum Drying is to let the raw material to be dried at vacuum condition. It uses vacuum pump to pump damp air out and make the working chamber form vacuum status. Therefore, the drying speed of raw material is improved and the energy is saved greatly. Notes: The solvent of raw material can be collected by using a condenser. If the solvent is water, the condenser is not required in order to save investment cost.
     

    APPLICATION
    This dryer is suitable for drying heat sensitive raw materials that can decompose or polymerize or deteriorate at high temperature. It is widely used in pharmaceutical, chemical, foodstuff and electronic industries.

    Round Static Vacuum Dryer
     

    Technical parameters

    Item / Specification YZG-600 YZG-800 YZG-1000 YZG-1400A
    Inner Dimension of the Dryer (mm) Φ600×976 Φ800×1247 Φ1000×1527 Φ1400×2054
    Outer Dimension of the Dryer (mm) 1135×810
    ×1024
    1700×1045
    ×1335
    1693×1190
    ×150
    2386×1675
    ×1920
    Qty of Layers 4 4 6 8
    Distance of Layers 82 82 102 102
    Dimension of Tray (mm) 310×600
    ×45
    520×410
    ×45
    520×410
    ×45
    460×640
    ×45
    Qty of Trays 4 8 12 32
    Inside Pressure of Drying Rack (MPa) ≤0.784 ≤0.784 ≤0.784 ≤0.784
    Working Temperature of Drying Rack (°C) 35-150 35-150 35-150 35-150
    Vacuum Degree of Empty Dryer -0.09~0.096
    Water Evaporation Rate (In the condition of -0.1MPa
    with temperature of 110°C) (kg/m2•hr)
    7.2 7.2 7.2 7.2
    Vacuum Pump
    (for the dryers with condenser)
    2X-15A
    2KW
    2X-30A
    3KW
    2X-30A
    3KW
    2X-70A
    5.5KW
    Vacuum Pump
    (for the dryers without condenser)
    SK-0.8
    2.2KW
    SK-2.7
    4KW
    SK-3
    5.5KW
    SK-6
    11KW
    Weight (kg) 250 600 800 1400

     

    Note:SZ water ring vacuum pump can be used together with mechanical pressure increasing pump in order to increase vacuum. 

    Ordering Information
    1) Please choose the suitable model according to the primary moisture content, final moisture content, temperature, vacuum degree, and drying time. The heat source can use steam, hot water, thermal oil, and electricity. If the customer required increasing the drying capacity by add more trays, please specify in the order. 2) If the customer required installation or spare parts, please specify in the order.
    3) Customized design service available.
    4) We guarantee the quality of the dryer and we ensured the spare parts for the dryer is available in a long term.

    • Round Static Vacuum Dryer
    • Round Static Vacuum Dryer

    此頁面上的內容需要較新版本的 Adobe Flash Player。

    獲取 Adobe Flash Player

    Related News
    Related Products
    • XSG Spin Flash Dryer

    • GZQ Vibration Fluidized Bed D

    • SZG Double Cone Rotary Vacuum

    • YZG Round Static Vacuum Dryer

    • FZG Square Static Vacuum Drye

    • LPG High-Speed Centrifugal Sp

    Top
    色婷婷亚洲六月婷婷中文字幕
    <input id="k0i0a"><tt id="k0i0a"></tt></input>
    <menu id="k0i0a"><tt id="k0i0a"></tt></menu>